Publicité
SAFETY INSTRUCTIONS
The owner and/or operator shall have an understanding of the product, its operating characteristics, and safety operating
instructions before operating it. Safety information shall be understood:
1. Study, understand and follow all instructions before operating this device.
2. No alterations shall be made to this product.
3. It shall be the responsibility of the user to ensure that applicable personal protective equipment (PPE) complies with applicable
local safety codes.
OPERATION
IMPORTANT: Charge the flashlight before first use.
Flashlight Use
1. The flashlight has the following normal operational modes: 500 Lumens –300 Lumens – 60 Lumens – OFF. Press the rear
power button to cycle through them.
2. The flashlight also has a Turbo mode (also know as a Boost mode) that delivers 1000 Lumens for 30 seconds. Press the power
button for 2 seconds while the flashlight is on to initiate this Turbo mode. After the 30 seconds, the flashlight reverts back to the
previous mode.
3. Unscrew the rear cap of the flashlight to access the battery.
4. Flashlight comes with a rear magnet to work hands-free.
5. Lightweight, durable construction with robust two-way clip to attach to your gear.
Charging the Flashlight
1. To access the USB Type-C charging port, pull out the rubber plug that covers the charging port.
2. To charge the flashlight, insert the smaller connector on the charging cable into the flashlight port and insert the larger USB-A
connector into a charging plug, computer, tablet or any device that can charge via USB.
3. The flashing red light indicates that charging is in progress and the solid blue light indicates that charging is complete.
4. Avoid turning on the flashlight when it is being charged.
5. At a minimum, charge every 6 months to keep the battery working normally and to avoid damage.
GENERAL WARNINGS
The light from this LED is very powerful and should not be shone directly into anyone's eyes, as this may cause short term
blindness. If the beam does shine in your eyes, close them and look away immediately. Avoid putting the light into water or
other liquids.
The area around the LED can become very hot if the light is left on for a long period of time. If the light has been left on for more
than one (1) minute, please avoid touching this area of the light or placing the light on surfaces or materials that are highly sensitive
to heat.
Avoid allowing the rear magnet come in close contact with electronic devices as these devices can be damaged by the powerful
magnet.
This device utilizes rechargeable Lithium-Ion battery that can rupture, ignite and cause series injury if missed usage. Observe the
follow safety rules;
DO NOT place battery or device in high temperature.
DO NOT tamper with battery wiring.
DO NOT puncture or damage battery.
DO NOT use battery that appears damaged.
DO NOT immerse or expose battery to water.
DO NOT alter or modify the battery.
DO NOT dispose of the battery in fire or water.
Failure to heed these warning may result in personal injury and/or property damage.
- Keep out of the reach of children.
- Only replace the battery with the same type of lithium-ion battery.
This product has been designed and manufactured using high quality, recyclable and reuseable materials and components.
The crossed wheeled bin symbol applied to the product indicates that it complies with European Directive 2012/19/UE.
Please inquire about the collection of electrical and electronic products in your area. Please comply with the local regulations.
Do not dispose of this product with your normal household waste.
info@observertools.com
US: +443 228 8759
EU: +33 7 49 84 59 19
www.observertools.com
Publicité
