Set The Wireless Encryption - Topcom SKYR@CER WBR 7121gmr NAS Guide D'installation Rapide

4.2

Set the wireless Encryption

Topcom strongly recommends to enable encryption. This is the only way to prevent
that unwanted users access your wireless network.
Three encryption settings are available : WEP 64bit, WEP 128bit and WPA(2)
J Choose Security Settings to access the encryption menu.
In this screen you can select your type of encryption. By default the encryption is disabled.
o
WEP 64-bit: In the example below WEP 64-bit Encryption is set.
1
Encryption: Choose WEP
2
Key Length: Choose 64-bit
3
Key Format: For 64-bit Encryption choose Hex (10 characters). This is an
ecnryption with 10 haxadecimal digits.
J For 128-bit Encryption 26 hexadecimal digits should be used.
- Security Settings page -
Setup the Wireless Network
11