Publicité
2. Connecting to a new remote control(in case the original remote control gets lost or damaged):
Keep the active Bling remote
controller near the control
module of the helmet.
Bluetooth headset
(BH51T range N/A)
button
"Pairing"
When helmet is powered off, hold
press the
button at the back of
the product until you hear "Pairing".
Press the " " button
on the helmet within
10 seconds confirm
connection to the the
Bling remote controller
The LED taillight will blink once
per second, indicating that
Bling remote controller needs
be connected.
"Connect the
Helmetphone"
Helmetphone
Switch on Bluetooth of your phone
and scan for the "Helmetphone"
device.
Blink three times
After successful connection, the
indicator will blink three times
in quick succession.
"Connected"
Click to connect. A voice prompt
"Connected" will be heard from
the speakers when the connection
is completed.
6
Publicité
