Télécharger Imprimer la page

Flex FX2221 Manuel De L'utilisateur page 11

Publicité

INSTALLING AND REMOVING
ACCESSORIES
COVER PLATE
NOTICE: Use the cover plate when cutting
decorative veneers, plastics, etc. It protects
sensitive or delicate surfaces from damage. It is
mounted on the bottom of the tool base.
Installation:
Insert the front of the base into the front of the
cover plate and lower the jig saw (Fig. 6).
The cover plate should snap securely and
audibly onto the rear of the base (Fig. 7).
Removal:
Press down on the two release tabs and slide
the cover plate forward about 1/2 inch.
Lift the cover plate off the base to remove it
(Fig. 8 & 9).
Fig. 6
1
Fig. 7
Fig. 8
Release Tabs
Fig. 9
2
-11-
2
1

Publicité

loading

Ce manuel est également adapté pour:

Fx2221-z