Helpful Information; Draining Your Ice Maker - Danby Designer DIM1524W Guide Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Draining Your
Ice Maker
WARNING:
The internal holding com-
partment of this appliance
for both stored ice cubes
and stored water is NOT a
refrigerated compartment.
We recommend changing
(replacing) any stored
water that has not been
used within a 12 hour time
period of the machine
being operational.

Helpful Information

In order to maintain a hygien-
ic environment within your ice
maker and prevent the poten-
tial formation of bacteria, it is
highly recommended that you
completely drain the ice
maker after each use (daily)
or if any water has been
stored within the internal
reservoir for in excess of
twelve (12) Hours.
To drain your ice maker;
• Place a drip tray beneath
the right rear portion of the
cabinet. Depending on the
amount of water contained in
the internal reservoir, the
water may exit the drain rap-
idly. Tilt the drain pan slightly
towards the drain spout to
prevent water from projecting
away from the intended water
collection area.
9
• Remove the drain cap
(as shown in fig. 9.1 ).
• When the exiting water flow
decreases to a 'trickle' slightly
tilt your ice maker backwards
to ensure all the water that
may have been stored inter-
nally is thoroughly drained.
Once the water has been
removed from the appliance,
wipe the internal reservoir
and ice bucket dry and leave
the ice maker lid in the open
position to expedite the drying
process.
Fig 9.1

Publicité

Table des Matières
loading

Table des Matières