Publicité
4. USE
Carefully review the safety information (Section 1) before you start using the appliance.
4.1. SETTING THE TEMPERATURE
1. Control panel
DISPLAY
1
LED1: COLD
2
LED2:
3
LED3: COLDEST
2. Temperature setting
The temperature of the refrigerator can be set by pressing the 'Set' button. The temperature setting is confirmed
if the 'Set' button is not pressed within 15 seconds. After this, the desired temperature is set and the LED for
the selected setting lights up. The following settings are possible: 'Cold', 'Colder', 'Coldest' and hold for three
seconds for 'Super'. The recommended setting is between 'Colder' and 'Coldest' (LED 2).
3. Super mode
Press and hold the 'Set' button for three seconds to enter 'Super' mode. The temperature setting is confirmed if
the 'Set' button is not pressed within 15 seconds. LED 1 and LED 2 light up on the display. Press the 'Set' button
again and go to 'Cold', 'Colder' 'Coldest' to switch off the 'Super' mode.
When 'Super' mode is switched on, the temperature inside the compartment cools down quickly, which prevents
the loss of nutritional value of the food and keeps freshness intact. The 'Super' mode switches off automatically
6 hours after switching on, and the temperature will return to the last set temperature.
BUTTON
A
Temperature setting
of the refrigerator
compartment
29
1
2
3
A
Publicité
