Limora EM128 Mode D'emploi page 21

h. When servicing the meter, use only specified replacement
parts.
i. Use with caution when working above 30V ac rms, 42V peak,
or 60V dc. Such voltages pose a shock hazard.
j. When using the probes, keep your fingers behind the finger
guards on the probes.
k. Connect the common test lead before you connect the live
test lead. When you disconnect test leads, disconnect the
live test lead first.
l. Remove the test leads from the meter before you open the
battery door.
m. Do not operate the meter with the battery door or portions of
the cover removed or loosened.
n. To avoid false readings, which could lead to possible electric
shock or personal injury, replace the batteries as soon as the
low battery indicator ("
o. Remaining endangerment: When an input terminal is con-
nected to dangerous live potential it is to be noted that this
potential at all other terminals can occur!
p. CATII-Measurement Category II is for measurements perfor-
med on circuits directly connected to low voltage installation.
(Examples are measurements on household appliances ,
portable tools and similar equipments.) Do not use the meter
for measurements within Measurement Categories III and IV.
") appears.
– 21 –