Télécharger Imprimer la page

Haier I-MASTER Manuel D'utilisation page 9

Publicité

6. Troubleshooting
This list summarizes the most common problems you could encounter with the appliance. If you are
unable to solve the problem with the information below, you could contact the Haier's Customer
Support.
Problem
The Air fryer does not
work
White smoke comes out
of the appliance.
Food are not
completely cooked.
The Display show error
code "E-1"
The Display show error
code "E-2"
Possible cause
The appliance is not plugged
in.
The frying bucket is not put
into the appliance properly.
You are cooking atty
Ingredients.
The bucket still contains greasy
residues from previous use.
The set temperature is too low
or cooking time is too short.
Too much ingredients in the
bucket.
The temperature sensor is
disconnected.
The Temperature sensor short
circuit.
Check i the plug is inserted in the wall
socket.
Push the bucket securely into the
appliance's body.
Careully pour o any excess oil or at
from the pan and then continue cooking.
Always clean the bucket thoroughly after
every use.
Increase the cooking temperature and
cooking time.
Decrease or place less batches of
ingredients into the bucket for complete
frying.
Unplug it from the power source and
contact the customer support.
Unplug it from the power source and
contact the customer support.
9
Solution
GB

Publicité

loading

Produits Connexes pour Haier I-MASTER