Télécharger Imprimer la page

Protect GE2-4L Mode D'emploi page 10

Publicité

Electrical connections must be made in accordance with current
regulations and by a qualified electrician.
Before any electrical connection and in order to avoid any risk of
electric shock, switch off all power supply and put back into
service only when the installation is completely finished.
Plug the appliance into an AC outlet that supplies power
(specifications, voltage, frequency, etc.) to the specifications on
the appliance's rating plate.
Check that the voltage of your electrical installation corresponds to
that of the appliance before connecting it.
Never leave children play with polythene bags or wrapping film,
risk of choking.
Keep the appliance in a cool, dry place.
For safety reasons, never leave the appliance unattended while it
is working.
If the power cable is damaged, it must be replaced by the
manufacturer, its after-sales service or persons of similar
qualification in order to avoid a hazard.
Never unplug or move the appliance by pulling on the power
cable.
Turn off and unplug the appliance before moving it.
Never use the appliance without its protective grilles.
Once assembled, it is strictly forbidden to disassemble the
protective grilles.
High voltage, do not insert objects into the unit. Do not touch the
inner electrical grill. Do not cover the appliance while its working.
Never put your hands and / or objects into the protective grilles.
Do not use water or detergent to clean the appliance. A dry cloth
will be preferable. Before cleaning, be sure to switch off the power
supply.
This appliance is intended for use in an area with good air
circulation, and should not be used in a closed room without air
circulation.
Do not use the appliance in a damp place, near a shower,
swimming pool, bathtub...
Do not immerse the appliance in water or any other liquid.
Do not expose the appliance to water spray, splashing water.
10

Publicité

loading