Télécharger Imprimer la page

Kartsana R-450 Serie Manuel D'instructions page 20

Publicité

1.
INTRODUCTION
1.1. Foreword
All the information detailed with regard to product treatment, disinfection and maintenance is
conveyed in line with our current knowledge and experience.
We reserve the right to make technical modifications to the rail to improve the product.
The
R-450 S INOX
rail has been tested in line with the UNE-EN 1789 standard.
1.2. Responsibility and guarantee
The rail should be checked at the time of delivery to the rescue organization. All its functions
should be explained in detail. The rescue organization is responsible for training all its employees
in the correct use of the rail.
The warranty is valid for two years following the date indicated on the purchase invoice.
The guarantee does not cover breakdown if this is a consequence of incorrect installation,
inappropriate treatment, or inadequate use of the product. Repairs must be carried out by a
technical service company approved by Kartsana or its respective representative.
The manufacturer will not accept responsibility for any anomaly caused to the rail by using
products that have not originated from Kartsana.
1.3. Specifications
SPECIFICATIONS
Maximum unassisted load:
Standards
Total length
Total Width
Loading Height
Recommended operatives required to load / unload an
occupied stretcher
Compatible stretchers
Rev. 8
05.24
OPERATION AND HANDLING OF
R-450 S INOX RAIL
R-450 S INOX
220Kg
UNE-EN-1865-5
EN-1789+A1
1708 mm
497 mm
Depends on the stretcher
1 operative, or 2 if the stretcher were
occupied by a larger sized patient.
241 series / TG-880 S C4 (Jupiter)
1

Publicité

loading

Ce manuel est également adapté pour:

R-450 s inox