Publicité
1. Front wheel installation
First insert the gasket into the steering shaft, and then insert the front wheel into the
steering shaft against the gasket to the steering shaft limit, and finally insert the gasket
into the steering shaft and tighten it with M8 nuts.
2. Rear wheel mounting
First, the motor (on the right) is removed from the box inside the car seat, then it is
mounted in the corresponding direction, and the rear axle is passed through the motor.
Put the rear wheels into the motor after passing the rear axle in the plum direction, and
then use the gaskets to cover the rear axle with M8 tighten the nuts and fix them.
Wheel Assembly
(Rear view)
D
Publicité
