Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. The pulse mode is used for increasing the speed to maximum for a short
time. To activate the pulse mode, turn the speed control knob to the P
(PULSE) position and to ensure continuous operation hold it down in this
position. As soon as you release the speed control knob, it will automatically
return to the OFF position.
5. If it is necessary to wipe ingredients off the inside of the mixing bowl and the
attachment, first turn off the food processor by setting the speed control
knob to the OFF position and then disconnect it from the power socket. Wait
until the rotating parts come to a stop and only then scrape away the
ingredients with a spatula.
6. After you have finished using the appliance, set the speed control knob to
the OFF position and disconnect the power cord from the power socket.
7. Wait until the rotating parts come to a stop and disassemble the food mixer
according to the instructions indicated above. Use a soft plastic spatula to
empty out the contents of the bowl.
8. Clean out the food processor after each use.
Quick Guide to Processing Ingredients
Attachment
type
Whisk
Whisk
Beater
Dough hook
C
LEANING AND
•
Before cleaning the stand mixer, always switch it off by setting the speed
control knob to the OFF position and disconnect it from the power socket.
•
Disassemble the mixer into its individual parts. Wait until moving parts come
to a complete stop before disassembly.
•
Thoroughly wash the used removable parts after every use using warm water
with a neutral dishwashing detergent. Then rinse them under clean running
water and wipe them dry with a fine wiping cloth or allow them to dry
naturally.
Instructions for use
Ingredients
Egg whites
Whipping
cream
Cake dough
Bread or Pizza
dough
M
AINTENANCE
Maximum
Processing
load
12 pcs
1 l
2,2 l
0,8 l
English
Speed
time
selection
4 min
6-8 min
6 min
4-5 min
MIN to 2
5-6
5-6
3-4
7
Publicité
Table des Matières
