Publicité
Step 6 Testing Process - Offline Use of K1 Machine
1) When using a blue laser offline with lightburn, click on "Edit" and select "Machine Settings." Change the PWM min value
($35) from 0 to 1. Note that $35 of FL20 should be set to 0 and that of blue laser should be set to 1.
If the $35 and $60 commands do not appear in the software, the machine firmware needs to be updated.
1
2
2) When using a blue laser offline with GRBL, click on "Grbl" and select "Grbl Configuration." Change the $35 value from 0 to 1.
Note that $35 of FL20 should be set to 0 and that of blue laser should be set to 1.
1
2
3
3
12
Publicité
