Technical Data - DS Produkte OTUMM Mode D'emploi

3. You can now align the centre stop second, hour and
minute counters.
4. To align the centre stop second, press button A for a
short time for individual steps or press button A for a
long time for a continuous run.
5. Press button B to align the next hand and repeat this
process for the hour counter and the minute counter.
6. Push the crown back to position I to complete the pro-
cess of aligning the chronograph hands.

Technical Data

Battery type:
Waterproof:
395 (SR 927 SW / Ø 2.6mm)
up to 10 bar
28