Publicité
4. Filter Clean Reminder
-
After 30 hours of fan usage, the
filters.
-
Keep pressing the
Note: The
button will continued blinking when the fan off until pressed the
remove the reminder.
5. Charcoal Filter Replace reminder
-
To enable Charcoal Filter Replacement Reminder:
With hood off, hold
illuminate for three seconds confirming the Charcoal Filter Replace Reminder is enabled.
-
To disable Charcoal Filter Replacement Reminder:
With hood off, hold
blink two times confirming the Charcoal Filter Replace Reminder is disabled.
-
After 120 hours of fan usage the
replacement.
-
To reset:
With hood off, hold the
confirming the 120 hour timer has been reset.
Clock settings
-
The display time on the screen is 12-hour clock. At the first time delivery power it automatically
display 12:00.
-
Press and hold
for 3 seconds to enable the clock setting.
Minute
Press
to increase minutes and
Under the setting mode, press and hold
decrease, the numbers are cyclically from 0 to 59.
The "Minute" will automatically confirm if without any operation in 3 seconds.
Hour
After setting the "Minute", Press
Under the setting mode, press and hold
decrease, the numbers are cyclically from 0 to 12.
The "Hour" will automatically confirm if without any operation in 3 seconds.
button indicator will begin to blink indicating it is time to clean the
for 3 seconds to remove this symbol if the filter have been cleaned.
button and
button simultaneously for three seconds. All LED indicators will
button and
button simultaneously for three seconds. All LED indicators will
button will slowly blink indicating the charcoal filters need
button for three seconds. All LED indicators will blink two times
to decrease minutes.
or
to increase Hours and
or
OPERATING INSTRUCTIONS
for 2 seconds, the timer will quickly increase or
to decrease Hours.
for 2 seconds, the timer will quickly increase or
11
button for 3 seconds to
Publicité
