Publicité
Liens rapides
Installation Instructions for
Gannet 1 Light Wall
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
1
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
2
Install the fixture arms to the fixture frame and secure them together using screws.
3
Install the candle tubes by slipping them over the socket.
4
Install the candle followers by placing them on top of the candle tubes.
5
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
2
FIXTURE ARM
1
CAUTION RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE SCREW
5
4
3
SOCKET
1
W 1877
B
-
LAMP
CANDLE FOLLOWER
CANDLE TUBE
W 1877
B
1.0
Publicité
Sommaire des Matières pour Visual Comfort & Co. STUDIO Serie
- Page 1 Installation Instructions for W 1877 Gannet 1 Light Wall W 1877 GENERAL PRODUCT INFORMATION: CAUTION RISK OF FIRE These fixtures are intended to be installed utilizing NEC compliant This product must be installed in accordance with the applicable installation code by a person familiar junction boxes.
- Page 2 ATTENTION RISQUE INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne. Utiliser les conducteurs d'alimentation supérieure à 90° c. BRAS DE LUMINAIRE VIS DE LUMINAIRE AMPOULE ADEPTE DE BOUGIE...
- Page 3 PRECAUCIÓN RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de suministro mínimo 90° c. BRAZO DE LA LÁMPARA TORNILLO DE LA LÁMPARA BOMBILLA SEGUIDOR DE VELA...
- Page 4 SAVE THESE INSTRUCTIONS!