Publicité
Assembly steps
1.
Align the bottom (piece 3) of the display with the base. (#1)
2.
The swivel is already fixed to the underside of the bottom. Screw the swivel(#2) on the base(#1) trough the hole in the bottom(#3) with the #8 screws.
3.
Mount the four corner posts on the bottom with the black connecting bolts, tighten with the hex key.
4.
Slide the black masonite panel in the corner post groove, the black side facing out.
5.
Screw the top on the post with the remaining connecting bolts.
6.
To expand the display, fix the swivel directly on top of each finished display.
7.
Insert the display panel in the top groove and then the bottom one.
6
6
1. 3" or 18" Base
2. Swivel
3. Bottom
4. Corner post
5. Top
6. Backing panel
7. Juction bolt
7
5
4
2
7
1
6
6
3
Hole to screw the swivel on the base
Included hardware:
-8 junction bolt
-4 screws #8 5/8"
-1 x 4 mm hex key
PRE-TOUR2
760, boul. Pierre-Roux E.
Victoriaville (Québec) G6T 1S6
CANADA
T 819 758-7525 | 1 800 567-5201
F
819 758-4747 | 1 800 567-5208
VENTES@ROCHELEAU.CA
ROCHELEAU.CA
Publicité
