Publicité
Change to the tuner mode
© In case of Tape mode .Eject a tape.
(|) In case of CD Changer mode.Press [BAND],
Selecting a Band
Press [BAND] to change the bands as follows.
FM1
#
FM2
FM3
*
AM
t_*
"ST" indicator lights during reception of a stereo broadcast.
ess
Manual Tuning
Press [ATUNE] or [SEEKVl to tune in a higher or lower frequency.
Seek Tuning
Press and hold [ATUNE] or [SEEKV] tor more than 0.5 seconds,
then release. Seeking will automatically stop when the signals of the
next broadcast station are received.
To reduce interference during
FM broadcasts (MONO)
Press and hold [SEL] for more than 2 seconds for monaural reception
in case a lot of interference is present in an FM stereo signal or to
improve the listening quality of weak FM broadcasts. To turn it off,
press [SEL1 for more than 2 seconds again.
(Fu
10
CQ-R145U
Publicité
