Publicité
3 Setting up the VoIP communication
Functions of the widget:
Before accepting the call: accept video call from the door station, reject, or open the door
■
directly
After accepting the call: make video call, open door, mute, end call, deactivate camera
■
image
Select a ringtone of 5 predefined tunes or upload a ringtone in the tile settings of the Door
■
intercom widget
Define the duration of the ring tone in the tile settings of the Door intercom widget
■
The widget closes automatically 3 seconds after the door is opened.
■
Video transmission in MJPEG, JPEG and RTSP
■
3.2 Option 2: Setting up the YOUVI camera module
Notes on the camera stream
On the configuration page of the door station, under Extended settings > Video, you will find
various settings for entering the resolution and frame rate. Please keep in mind that high frame
rates and resolutions will additionally burden your network.
To make use of the wantec door station's camera, it needs to be added and set up within YOU-
VI Configuration.
1.
To add the camera module open YOUVI Dashboard on the panel and select Install Camera
Device. If you do not have a full license yet, you can purchase it in the PEAKnx Shop.
2.
Switch to YOUVI Dashboard > Camera Device OR open the configuration page on your PC
in your browser, making sure that the system running the browser is on the same network
as the PEAKnx touch panel. To do this, enter the following URL in your browser:
−
http://x.x.x.x:31228, where x.x.x.x must be replaced by the local IP address of your PE-
21
Publicité
