Publicité
Setting up the PEAKnx panel as an intercom station
11.
Camera Stream: Specify the camera link. This can be found under Users in the properties
of the SIP phone (PEAKnx Panel) > Switching and controlling > Video URL.
12.
Stream Type: Select „MJPEG".
13.
Unlock Method: Select the mechanism with which your door opener function is linked, e.g.
DTMF. The following methods are available:
−
DTMF: The opening code for DTMF can be found under Users in the SIP phone proper-
ties (PEAKnx Panel). The only option currently available for activating the door opener in
the Access System is via DTMF (either SIP INFO or RFC2833).
−
Http Request: Enter the http command to open the door.
−
Telegram: Specify the KNX group address of the door. Lock after: If a group address is
specified, a 1 is sent to the group address when the door opener icon is touched and a 0
is sent after the opening interval has elapsed.
14.
Save your entries.
14
Publicité
