Publicité
Storage
Store the unit and accessories in a dry, cool and weather-protected place to
ensure optimum service life. Protect the unit and accessories from chemicals,
intense heat and mechanical damage.
Cleaning
The hand blender and accessories should be cleaned and dried after each use.
Proceed as follows:
1.
Disconnect the mains plug from the power supply.
2.
The motor, mains cable and mains plug must never get wet. Cleaning with
a slightly damp cloth is recommended.
3.
All parts should be cleaned by hand as they are not dishwasher-safe.
4.
When cleaning in the dishwasher, make sure that the temperature does
not exceed 60°C to avoid deformation.
5.
In general, all parts and blades that come into contact with food should be
cleaned with hot water and a little washing-up liquid.
13
Problem Solving
Problem
Possible Cause
The blender will not turn on
The unit is not connected to
the power source
The motor is defective
The ingredients are too solid
The blender gets very warm
There is not enough liquid in
the blender jug
An air bubble has formed
The blender does not
manage to chop the
ingredients
There is too little liquid in the
blender jug
Large, hard ingredients at
the bottom, in the blender
jug cannot be chopped up
Note
Please contact the KLAMER Customer Support Team at hello@klamer-kitchen.com with
any questions or uncertainties. We will be happy to help you!
Solution
Insert the mains plug into a
suitable power socket
Contact the KLAMER
Support Team
Cut the ingredients into
smaller pieces, thaw them or
use softer ingredients in
general
Make sure that the head of
the blender is covered with
liquid
Add liquid if necessary (the
blades should be sufficiently
covered) and chop the
ingredients. Use a pestle or
stir the ingredients and add
more liquid if necessary
before blending again.
14
Publicité
