Publicité
English (en)
Important information regarding installation of the adaptation shelf
This shelf is adaptable in length to match your specific requirements.
WARNING:
A long shelf entails a risk of collapse under load conditions. This may cause extensive material damage and/or
serious injury. We cannot be held responsible for such damage or injury caused by incorrect installation.
Instructions for correct installation:
•
If the shelf exceeds 500 mm / 196 ¾" after adaptation, you must, in addition to attaching the shelf to the
furniture side and to the opposite wall, attach shelf supports on the longitudinal wall with a maximum
distance of 500 mm / 196 ¾", see figure.
•
Screws and shelf supports for wall attachment are not included
hardware shop for the correct choice of screws and shelf support system, depending on wall material.
•
Installation must be carried out by a person qualified for wall mounting of shelves.
•
Correctly installed, the shelf has a maximum load-bearing capacity of 10 kg per running metre.
Example of shelf installation
*
. Therefore, please contact your local
Publicité
