Publicité
Fanaway Classic Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel. Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire
strands or connections.
Securit hook
Metal safety cabel
Blue (For LIGHT)
White (To Motor N)
Black (To Motor L)
8 | P a g e
ELECTRICAL WIRING DIAGRAM
Black L (Live)
White N (Neutral)
Black (AC IN L)
White (AC IN N)
Black (To Motor L)
White (To Motor N)
Blue (For LIGHT)
Fig. 11a
Fig. 11b
1.
Connect the household live supply
wire (black) to receiver input wire (black,
AC IN L) as shown in Fig. 11.
2.
Connect the household neutral
supply wire (white) to the receiver input
wire (white, AC IN N).
3.
Connect the household ground
wire to the fan bracket ground wire
(green) and fan body ground wire.
4.
Connect the reveiver output wire
(black, TO MOTOR L) to motor live input
wire (black, TO MOTOR L).
5.
Connect the receiver output wire
(white, TO MOTOR N) to motor neutral
input wire (white, TO MOTOR N)
6.
Connect the receiver output wire
(blue, FOR LIGHT) to fan light live input
wire (blue, FOR LIGHT)
7.
Pull the metal safety cable on the
security hook, tight the safety cable
(Fig.11a & Fig.11b)
8.
After connecting the wires, spread
them apart so that the green and white
wires are on one side of the outlet box
and the black and blue wires are on the
other side.
9.
Turn the connecting nuts upward
and push the wiring into the outlet box.
V 1 . 4 ( 0 8 / 2 0 2 1 )
Publicité
