Publicité
V4.1
1.
Position the right frame (A) and the left
frame (B) so that they are facing each
other, ensuring holes in the frame are
position upward (Fig. 1-1).
2.
Fasten the bottom rack to the frames
using the short screws (#5) and the
nuts (#6) (Fig. 2).
a.
Do not fully tighten the fasteners
until they are all in place.
3.
Place one of the shelves (#3) between
the frames and fasten in the middle
using the short screws and the nuts
(Fig. 3).
4.
Place the remaining shelf between the
frames and at the top using the short
screws and the nuts (Fig. 4).
5.
Ensure that all of the fasteners are
securely tightened.
6.
Use the long screws (#7) and the
anchors (#8) to secure the rack to the
wall in the desired position through the
holes in the frame (Fig. 5-1).
Visit www.princessauto.com for more information
Power Tool Organizer Storage Rack
9240268
5
Publicité
