Publicité
Liens rapides
THANK YOU FOR PURCHASING THE
GIOTTO STEREO CARTRIDGE.
PACKAGE CONTENT
|
Cartridge body
|
Set of head-shell fixing 2,5mm screws
(non-magnetic)
|
2mm Allen Wrench
|
User Manual
12,5mm
4,6mm
6.5mm
19.4mm
GIOTTO
MC Low Output
Output level
Coil Wire
0.35mV
Copper
Frequency response
Total weight
10-40000Hz
10g
Impedance
Body
8Ω
Duralumin 7000 alloy
Compliance
12×10-6cm/dyne
Channel separation
>30dB
Cantilever
Boron
Diamond
Ultra Micro Elliptical
BEFORE USING
1 The stylus is very delicate and applying excessive
force to the stylus, such as finger pressure, can
result in damages. Handle the cartridge with the
utmost care.
2 A powerful magnet is used in the cartridge.
Operating steel/magnetic tools or similar items
near the cartridge will exert a force on the
magnet and may result in damages to the stylus
and the cartridge.
11.9mm
19.4mm
GIOTTO
Giotto is our latest MC cartridge, featuring a refined
Ultra Micro Elliptical diamond and Boron cantilever.
This is the perfect combination to ensure extended
frequency response with outstanding dynamics, fine
details, precise imaging and elegant sound with any
vinyl.
25.9mm
11mm
4.35mm
Publicité
Manuels Connexes pour Gold Note GIOTTO
Sommaire des Matières pour Gold Note GIOTTO
- Page 1 19.4mm 4.35mm 6.5mm 19.4mm GIOTTO GIOTTO MC Low Output Giotto is our latest MC cartridge, featuring a refined Output level Coil Wire Ultra Micro Elliptical diamond and Boron cantilever. 0.35mV Copper This is the perfect combination to ensure extended Frequency response...
- Page 2 SET-UP NOTE Mount the cartridge on the tonearm head-shell using Applying heat to the output terminals of the the supplied Allen Wrench and one set of the 2,5mm screws. Adjust it to the stylus position suggested for cartridge will cause internal damage to the your turntable system (see Fig.1).
- Page 3 11.9mm 4,6mm 19.4mm 4.35mm 6.5mm 19.4mm GIOTTO GIOTTO MC Low Output Giotto ist unser neuestes MC-Tonabnehmersystem mit Ausgangsspannung Spulendraht einem raffinierten Ultra Micro Elliptical-Diamanten und 0.35mV Kupfer einem Bor-Cantilever. Dies ist die perfekte Kombination, Frequenzgang Gewicht um einen erweiterten Frequenzgang mit hervorragender 10 - 40000Hz Dynamik, feinen Details, präziser Abbildung und...
- Page 4 MONTAGE HINWEIS Montieren Sie den Tonabnehmer mit dem mitgelieferten Erwärmen Ausgangsanschlüsse Inbusschlüssel und dem Satz 2,5mm-Schrauben am Headshell des Tonarms. Stellen Sie ihn auf die für Ihr des Abtasters führt zu internen Schäden am Plattenspielersystem vorgeschlagene Nadelposition ein Tonabnehmersystem. (siehe Abbildung 1). Ausgangsanschlüsse sind für...
- Page 5 4.35mm 6.5mm 19.4mm GIOTTO GIOTTO MC a bassa uscita Giotto è la nostra ultima testina MC, dotata di un Livello di uscita Bobine raffinato diamante con taglio Ultra micro ellittico e un 0.35mV Rame cantilever in boro. Questa è la combinazione perfetta...
- Page 6 ISTRUZIONI DI MONTAGGIO ATTENZIONE Montare la testina sullo shell utilizzando la chiave a L’applicazione di calore ai terminali di uscita brugola e il set di viti da 2,5 mm in dotazione. Seguire le istruzioni del giradischi o del braccio che si sta causerà...
- Page 7 4.35mm 6.5mm 19.4mm GIOTTO GIOTTO MC Sortie basse Giotto est notre dernière cellule MC, dotée d’un Niveau de sortie Fil de bobine diamant ultra micro elliptique raffiné et d’un cantilever 0.35mV Cuivre en bore. C’est la combinaison parfaite pour assurer une Réponse de fréquence...
- Page 8 MONTAGE REMARQUE Montez la cartouche sur le boîtier de la tête de lecture La présence de chaleur aux bornes de sortie à l’aide de la clé Allen fournie et d’un jeu de vis de 2,5 mm. Ajustez-la à la position du stylus suggérée pour de la cellule peut causer des dommages votre système de platine (voir Image 1).