Publicité
LAVA GRANULE MEDIA PLACEMENT
Pour the lava granules into the Outdoor Fire Pit so that the burner
Figure 1.
Pour the first bag of the lava
granules media into the burner
support.
Figure 2.
Pour the additional bag of lava
granules onto the burner support.
Spread the media evenly covering
the burner.
Protective Screen
TUMBLED LAVA STONE MEDIA PLACEMENT
Figure 1.
Pour the first bag of Tumbled Lavs
Stone onto the burner support.
Spread the media evenly covering
the burner.
Figure 2.
Pour the additional bags of Tumbled
Lavs Stone onto the burner support.
Spread the media evenly covering
the burner.
Protective Screen
Note: See Page 7 for Protective Screen Media Clearance
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
CAUTION:
Lava granules used in a fire pit are porous and when heated up to normal operating temperature
can cause trapped gasses or moisture to expand and cause a "pop" and "launch" outside of the fire pit, which
could cause injury or property damage. Allow lava granules to completely dry after getting wet
is covered by 1/2" and spread evenly.
(See Figure 1 and 2)
CAUTION:
BURN HAZARD. LAVA GRANULES
WILL REMAIN HOT FOR SOME TIME AFTER USE.
hosed off, before lighting and using the fire pit.
Page 9
,
rained on or
Publicité
