Publicité
Option 5 – Installation into Ground
NOTE: This option is recommended for short term applications only. For longer term solutions, it is
strongly recommended to install with support rebar (Option 3) or use Sika
(Option 4).
Tools Needed:
• Sacrificial piece of wood larger than the diameter of the yard stake
•
Hammer (the heavier the better)
Check for any underground pipes or wire before driving the metal stake or rebar
into the ground.
1. Place your sacrificial wood on top of the stake tube and hammer the stake into the ground until
the flange meets the ground.
2. Assemble the pole into the base.
Installation 3
1.
8
PostFix
Fence Post Mix
®
®
2.
Publicité
