LENCO TDV901 Mode D'emploi page 4

 To completely disconnect the power input, the mains plug of the apparatus shall be disconnected
from the mains, as the disconnect device is the mains plug of apparatus.
 Don't step on or pinch the power adaptor. Be very careful, particularly near the plugs and the
cable's exit point. Do not place heavy items on the power adaptor, which may damage it. Keep
the entire device out of children's reach! When playing with the power cable, they can
seriously injure themselves.
 Unplug this device during lightning storms or when unused for a long period.
 The socket outlet must be installed near the equipment and must be easily accessible.
 Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
 Devices with class 1 construction should be connected to a main socket outlet with a protective
earthed connection.
 Devices with class 2 construction do not require a earthed connection.
 Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord.
This can cause a short circuit.
 Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric
shock.
28. If the product contains or is delivered with a remote control containing coin / cell batteries:
Warning:
 "Do not ingest battery, Chemical Burn Hazard" or equivalent working.
 [The remote control supplied with] This product contains a coin / button cell battery is swallowed,
it can cause severe internal burns in just 2 hours and can lead to death.
 Keep new and used batteries away from children.
 If the battery compartment does not close securely, stop using the product and keep it away from
children.
 If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
29. Caution about the use of Batteries:
 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
 Battery cannot be subjected to high or low extreme temperatures, low air pressure at high
altitude during use, storage or transportation.
 Replacement of a battery with an incorrect type that can result in an explosion or the leakage of
flammable liquid or gas.
 Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion.
 Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or that leakage of flammable liquid or gas.
 A battery subjected to extremely low air pressure that may result in an explosion or the leakage of
flammable liquid or gas.
 Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other
connections have been made.