Publicité
Assembly Instructions
Workbench
Item No. 2865535
1 Intended use
The product is a steel work bench for use as a durable work table. There is one drawer that can
be used to keep hardware, tools, or materials nearby but off the main work surface.
Important:
Never exceed the maximum loads. See section: "Technical data".
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery content
Refer to the appended parts list
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can lead to personal injury.
Safety instructions
Read the assembly instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
4.1 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an au-
thorised repair centre.
4.2 Handling
Please handle the product carefully. Jolts, impacts can damage the product.
4.3 Operating environment
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, flammable gases, steam and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
4.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the appliance.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
Asssembly instructions
www.conrad.com/downloads
or scan the QR code
4.5 Assembly
Risk of injury! Get help from another person when handling heavy loads.
Carefully inspect all parts and hardware before assembly. Make sure nothing is damaged
or missing. Do not assemble if any components are defective or absent.
Use caution during assembly. Parts have sharp corners and edges that can cause injury.
Keep fingers away from pinch points when inserting bolts or screws.
Only follow the assembly steps as directed. Never modify or alter the workbench design in
any way. Making changes risks destabilizing the structure.
Place on a flat, stable, level floor. The bench must not wobble or rock once assembled.
If uncertain about safe assembly or use, consult a professional for assistance. Improper
assembly can lead to collapse and bodily injury.
5 Usage
Do not exceed the maximum load capacity. See section: "Technical data".
Distribute loads as evenly as possible.
Do not use the product as a climbing aid (e.g., ladder).
6 Installation
Refer to the appended assembly instructions.
Use the following, additional accessories:
– Work gloves
– Mallet
– Flat screwdriver
– Adjustable wrench
7 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
8 Technical data
Maximum load .............................. top shelf: 100 kg
bottom shelf: 100 kg
drawer: 30 kg
Sheet thickness ............................ 1.0 mm (uprights and beam)
0.6 mm (middle cross bar)
1.0 mm (drawer)
Dimensions (W x H x D) ............... workbench: 1200 x 1550 x 600 mm
drawer: 1095 x 70 x 450 mm
Weight .......................................... 26.5 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.
*2865535_v1_0723_02_dh_mh_en
Publicité
