Display Lighting; Lcd Contrast; Software Version - FTE Maximal PRO 300 Manuel D'utilisation

Chapter 2. Programming and configuring
2.1 PRO 300 configuration
PRO 300 allows configuring the display lighting and the menus languages.
In order to get into this mode, you should press simultaneously "right" and "OK"
buttons during the first seconds after connecting PRO 300.
2.1.1 Language
In order to change the language in the menu, you should place the cursor in
Change language
option. Press O O K to get into change of language menu.
With the vertical buttons (Up/Down) select the wished language and press O O K.

2.1.2 Display lighting

In order to change the display lighting, you should place the cursor in the
On/off
option. Press O O K to get into the menu.
With the vertical buttons (Up/Down) select between On / Off to to activate or
deactivate the light in the display and press O O K.

2.1.3 LCD contrast

In order to change the display contrast, you should place the cursor in the
Contrast
option. Press O O K to get into the menu.
With the vertical buttons (Up/Down) select the contrast value between 0 and 6.
Then press O O K to save changes. .

2.1.4 Software version

To view the firmware version of the programmer, you should place the cursor in
the SW version Info option and press O O K.
The display will show information about programmer version number and date
2.2 Initialization
When the programmer starts, it checks if on the other side of the series cable
or RJ-45 there is a module connected. If there is not any, it shows an error
screen warning the user of it.
If PRO 300 is connected to a module that is not in its database, it informs the
user that it is does not recognise the device, and tells the user which devices
can be used. In case that it is connected to a module which is endured by the
system, you have to go to the corresponding programming menu.
User's manual · PRO 300
- 3 -
Main menu
1.Change language
2.Light On/Off
3.LCD Contrast
4.SW version info
Change language
1.English_____________
2.Deütsch
3.Français
4.Español
Light On/Off
Light
1.On_____________________
2.Off
LCD contrast
LCD
Level 2
SW version info
PRO 300
Fte maximal
ERROR
Module not found
Check connection
PRO 300 Version_en_1.0
_____
...
_
...
______
__l___
1.0.11
25.07.13
FTE maximal