Switch Button; Battery Charge; Battery Level; Software Updates - Volfoni EDGE VR VPEG-05010 Manuel D'utilisation

4.2 Switch button

EDGE VR has a switch button with 3 positions (all in 3D
TM
mode by default)
4.3 Battery
The EDGE VR battery life is about 40H
TM

4.3.1 Battery Level

When starting up the glasses and with a short press of
the button, the glasses will show the level of battery life
by the number of flashes of the LED:
- Low level (less than 30%): one flash
- Intermediate level (between 30% and 90%): two flashes
- High level (greater than 90%): three flashes
12

4.3.2 Battery Charge

The battery charging will be indicated by the LED when
the USB cable is connected:
- Steady light: charging.
- Off: charging is complete.
It is also possible to see the exact level of your glasses'
battery charge by connecting to your computer and
using the Volfoni Loader (see section Advanced settings
via Volfoni Loader).
Once the glasses are recognized,the level bar is
displayed.
4.3.3 Wireless battery monitoring (only with EDGE
To enable the wireless battery monitoring you need to
plug your ActivHub RF50 to your computer via USB.
TM
Launch the Volfoni Loader (available on www.volfoni.
com section "Support"), click on «battery» (menu
"Edition"). The popup will show you the battery level of
all the glasses synchronised with the ActivHub

5. SOFTWARE UPDATES

Before using the EDGE
TM
have the latest version of software from our website. For
this purpose, please download the « Volfoni Loader »
software (http://volfoni.com/en/support) and connect
your glasses to your computer. Then start the software
and follow the instructions below.
- choose the menu "SUPPORT"
- choose "Upgradable Software"
- download the application "VOLFONI LOADER"
TM
VR glasses, make sure you
VR)
TM
RF50
13