EN
Key to symbols
Notiz
Stromschlag
Warning - risk of electric shock
Stromschlag
Wasserhahn
Warning - risk of water damage
Verweis anderes
Dokument
Cross reference to other products or
documentation
Faserplatte
Ersatzteil
Spare part
Optional
Optional
Ohr
Richtig
Correct installation
Bohrmontage
Falsch
Incorrect installation
Fliesenleger
Installation
Installation work
Achtung
Bohrmontage
Drill mounting
Wasserhahn
Klebemontage
Adhesive mounting
Wasserzulauf
Wasserablauf
Leak test
4
Important information –
Please note!
Safety information
– The safety, function and integrity of the product can only be
guaranteed if the information provided here is observed.
Failure to do so may result in injury or damage to persons
or property. The manufacturer is not liable for any damage
resulting from a failure to observe the instructions.
– It is essential that you follow the instructions given in the
installation guide in order to prevent installation errors and
damage to the product.
– Please observe the general safety and accident prevention
regulations in addition to the information provided in these
instructions.
About this guide
– This installation guide must be available for the entire
duration of the installation process. If the installation is to be
carried out by several individuals (e.g. fitter, tiler etc.), then
the installation guide must be passed on as appropriate.
– The dimensions are given in mm (millimetres).
– The illustrations are not true to scale.
– Subject to technical changes.
Installation information
– Only to be installed by qualified specialists.
– The underlying structure must be suitable for bearing the
weight involved.
– During installation, the tightness of the fittings to the
pedestal column must be checked and ensured.
– Handle the product with the greatest care in order to
prevent damage. Rings and other items that could damage
the product must be removed before installation.
– Large, bulky or heavy items must be installed by two people.
– Heavy loads (e.g. sitting on it) can result in damage to the
vanity unit structure.
– If it is not possible to drill into the walls, the wall bracket can
also be fully glued to the wall and floor.
Verweis anderes
Dokument
Please also observe the separate documentation
(e.g. for waste fittings).