OZKAK Rapid-Fire Mode D'emploi

Rapid-Fire
Game Controllers
ENGLISH
Please read carefully this user manual before using this
product. If you get any questions,
please contact us by email: ozkak@outlook.com.
Structure:
To install
1) In the game, you can customize and drag the
commonly used buttons (such as fire, aim, etc.)
to a suitable position on both sides of the
tablet screen. Buttons can be enlarged for
better response.
2) Pull up the Buckle③ on the back of the
controller.
3) Cover the buttons just set on the screen with
touch points of the controllers (It is
recommended to cover the manual fire button
with Rapid-fire Touch Point⑨).
for Tablet
4) Pull down the Buckle③. If needed, turn the
Anti-loosening Screw④ to make your tablet
more secure.
5) Long press the Power Button① to turn on the
Electric Rapid-fire Controller.
P.S. Rapid-Fire Touch Point cannot work as a
normal physical touch point, it can only be used
when power is on.
Rapid-Fire Touch Point
There are 4 touch points for this pair of tablet game
controller, but only one of them is rapid-fire touch
point, that is the ⑨ indicated in the photos. The
other 3 touch points are just ordinary physical touch
points, which can only complete a single shot at
each press.
"Rapid-Fire" means that when you press and hold
the L1 Trigger② in "Rapid-fire mode", the
Rapid-Fire Touch Point⑨ will keep releasing
current on to the screen quickly to simulate a quick
finger click on the shooting button, so your
character in the game will keep shooting quickly,
just like he is using an automatic rifle but no
increase in recoil. So that you can aim and kill the
enemy more easily.
Light indication
1) The blue light keeps on for "Single shot mode",
2) The red light keeps on indicating "charging"
3) The green light keeps on indicating "fully
Mode Switch
1) Long press the Power Button① to turn on the
2) In the turn-on state, short press the Power
3) In Rapid-fire mode, short press the Power
4) If you enable the recording function, the order
1
Email: ozkak@outlook.com Website: www.ozkak.com
and it flashes for "Rapid-fire mode"
charged"
Electric Rapid-fire Controller, and press the
Power Button① for 3 seconds to turn it off.
Button① to switch between "Single shot mode"
and "Rapid-fire mode"
Button① while pressing and holding the L1
Trigger②, the firing speed will switch between
8 times, 16 times, 24 times, 32 times per
second.
of speed switching would be "recording speed,
8 times, 16 times, 24 times, 32 times per
second"