Audiovox PRESTIGE PLATINUM+ APS 95 BT3 Guide De Programmation

The transmitters included with the security system have been pre - programmed
at the factory, with each button pre - assigned to control a specific function of the
security system. Although the security system in the vehicle has either 3 or 4
channels ( RECEIVER ) depending on the model, the transmitters included with the
system are 7 channel transmitters. This allows you to program each transmitter to
more than one vehicle in two car families, and also allows you to change which button
( s ) control certain functions of the system. ( Example: Transmitter channel 5
can be programmed to activate Receiver channel 2. ) Refer to the chart below
for access to each of the transmitter channels, and for the standard factory
button assignments.
TRANSMITTER
CHANNEL BUTTONS CHANNEL
1 1 1
2 2 2
3 3 3
4 2 & 3 4
5 1 & 2 -
6 1 & 3 -
7 1, 2, 3 -
* Some of the more common accessories for these additional channels are;
AS 9151N
AS 9153
AS 9256
Released (ENGLISH ONLY) 8-15-95.
Released French & Spanish. 10-31-95.
TRANSMITTER PROGRAMMING GUIDE
Model : APS 95 BT3
SYSTEM RECEIVER
FUNCTION
Remote Arm & Disarm
Remote Emergency Panic
Remote Door Lock & Unlock
* Pulsed Output for Accessories
* Switched Output for Accessories
* Switched Output for Accessories
-
-
-
Remote car starter
Remote window roll up
Remote trunk release relay
128-4619
1 of 12