Publicité
ENG
Pairing your MiiSOUND wireless speaker
1: Make sure the speaker is charged and turned OFF.
2: Press and hold the
button for 2 seconds to turn the speaker on.
3: Activate BT on your phone or other device and search for new device and
select: MiiSOUND by MIIEGO®.
The speaker will remember your phone/device and automatically reconnect
the next time you turn it on.
An unpaired speaker will automatically turn off after 15 minutes.
Charging the MiiSOUND speaker
Use a 5V DC/1.5A USB adapter for charging.
When the Red light is on, the speaker is charging.
When the Red light is off, the speaker is fully charged.
Full charging time is around 4 hours.
Next time charging
When you hear a warning tone every 180 seconds, the battery status is low
and needs charging.
Turning Your MiiSOUND On and Off
ON: Press and hold the
Button for 2 seconds until a tone is heard.
OFF: Press and hold the
Button for 2 seconds until a tone is heard.
Pairing and connecting 2 x MiiSOUND speakers with TWS
TWS only works when connecting two MiiSOUNDs together.
1: Turn on both speakers (BT mode). Make sure they are unconnected and
within 10 meters distance.
2: Press button 2 (TWS) once on one speaker. The speaker emits a tone to
indicate entering TWS-pairing mode.
3: The other speaker will then automatically wirelessly connect to the first
speaker.
4: Then activate BT on your phone and connect with the other speaker.
2
Publicité
