Assembly; Gun Holder/Washer Connection; Detergent Bottle/Washer Connection; Wand/Gun Connection - AllTrade TRADES PRO 1800 PSI Manuel De L'utilisateur

This Pressure Washer requires some assembly. If you have any problems with the
assembly of your Pressure Washer, please call the Pressure Washer helpline at
1-800-423-3598. If calling for assistance, please have the model, revision, and serial number
from the data tag available.
1. Using a box cutter, cut open the Pressure Washer carton on top.
2. Carefully remove all items from the box and inspect for completeness (see Functional
Description).
Attach and slide down holder to the side of the pressure washer as shown.
1. Attach and slide down detergent bottle holder to the side of the
pressure washer as shown.
2. Insert detergent bottle inside the holder.
3. Insert siphon tube inside the bottle and attach the bottle cap to
the bottle.
Attach the Wand to Gun by pressing the
Wand inside the Gun and then turning
clockwise until it locks inside the Gun. Tug
on the Wand to make sure it is secured.

GUN HOLDER/WASHER CONNECTION

DETERGENT BOTTLE/WASHER CONNECTION

WAND/GUN CONNECTION

ASSEMBLY

GUN/WAND HOLDER
WAND
11
GUN