Manuels Connexes pour Kuat IBEXA1
Sommaire des Matières pour Kuat IBEXA1
- Page 1 IBEX ™ RETRACTABLE TONNEAU ADAPTER COMPATIBLE WITH PACE EDWARDS ULTRAGROOVE ® ® ASSEMBLY ASSEMBLY VIDEO...
- Page 2 Parts (24) M8 x 16 Bolts (12) T-Nuts (12) M8 x 1.25 Nuts Retractable Tonneau Adapter 5mm Hex Key...
- Page 3 Retractable Tonneau Adapter Installation Insert (6) M8 x 1.25 Nuts into each driver and passenger side Tonneau cover T-channels.
- Page 4 Install Retractable Tonneau Adapters into M8 x 1.25 Nuts using (12 ) M8 x 16 Bolts. Ensure Retractable Tonneau Adapters are aligned with each other, and centered on the truck bed rail. A medium strength threadlocker is recommended. Torque bolts to 16 Nm...
- Page 5 Insert (6) T-Nuts into driver and passenger side IBEX ™ bed rail T-channel.
- Page 6 Position IBEX onto Retractable Tonneau Adapters. Ensure ™ IBEX is aligned and centered on truck bed rail. ™ Secure IBEX to Retractable Tonneau Adapter by threading ™ (12) M8 x 16 Bolts through Retractable Tonneau Adapter bolt holes into previously placed T-Nuts. A medium strength threadlocker is recommended.
- Page 7 • Do not take through automatic car wash. • Drive responsibly. If you have questions or problems, please contact Küat directly by calling toll free 1(877)822-KUAT, or by email: info@kuat.com ADVERTENCIAS • Siga las instrucciones para un montaje, instalación y uso adecuados.
- Page 8 You can review our limited warranty on our website or call customer service at the number below if you have questions or need a repair, replacement, refund, or a copy of the limited warranty. www.kuat.com/warranty Questions or comments? Drop us an email or call us directly! kuat.com info@kuat.com...
- Page 9 1.877.822.5828 info@kuat.com kuat.com...