Publicité
1
2
3
Fan Blade Assembly
Remove the 3 screws shown as above
figure before taking down the top housing .
x
2
Time Saver:Washers for blade screws can be set on each
blade screw prior to installing blades.
Locate 12 pcs blade attchment screws and washers in hardware
pack. Slide blade through center band and align holes. Insert
3pcs blade screws and washers with fingers. Tighten securely
with a phillips screwdriver. Repeat for the remaining blades.
Reattach to plate to motor yoke and install it by aligning the key
slot holes on the motor yoke us- ing previously removed screws.
Note: The reverse switch must be site on the top
housing.
Installation & Operating Instructions for the
Parrotuncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
3
x
2
4
3
F6287QQ
Outlet box
washers
Screws
take from
screw
hardware
washer
pack
blade
center band tilted hole
blade bracket
center bank
Publicité
