Charlton & Jenrick valor PE2 Serie Instructions D'installation

INSTALLATION INSTRUCTIONS
PE2LFPW—PE2 4-Sided Ledgeview Front,
Pewter for PE2 Electric Fireplace
NOT FOR USE WITH GAS MODEL FIREPLACES
1
27 16 "
[688 mm]
Installation
The PE2LFPW is held in place by hooks and magnets.
Hooks are already installed on the back of the front.
Hanging bracket and bottom magnet brackets, supplied
loose, must be installed to the fireplace.
1. Secure the hanging bracket to fireplace with 3
screws supplied.
2. Install bottom side brackets. Release 2 screws
on each side of the fireplace, at the bottom.
4009635-01
© Copyright Miles Industries Ltd., 2024.
13
23 16 "
[605 mm]
9
[15 mm]
16 "
1
10
"
8
[258 mm]
[642 mm]
Slide the brackets under the screw heads in the
orientation shown; tighten the screws.
3. Hook front to top bracket & stick bottom magnets to
side brackets.
PE2LFPW Ledgeview Front:
2 hooks at top, 2 magnets at bottom
Hanging bracket
4011891
1
"
25
4
Ledgeview
Front Assy
Overview
PE2
Bottom
brackets (2)
4011892
PE2 right
side view