Publicité
SMARTPHONE HOLDER
BIKE/MOTORCYCLE/SCOOTER
You have just acquired a KeyOuest brand product and we thank you for it, we hope that it will bring you complete
satisfaction.
PACKAGING CONTENT
• A smartphone holder
• A user manual
WARNINGS & SAFETY INSTRUCTIONS
Safety instructions
This manual will familiarize you with the operation of the product. Keep it so you can refer to it when needed.
•
This product is not a toy. Keep it out of the reach of children. Supervise children to ensure that they do not play with the device.
•
Do not attempt to disassemble or reassemble your stand.
•
Do not use any cleaning products containing alcohol, ammonia, benzene or abrasive substances.
•
If cleaning is necessary, use a soft cloth, dampening it with a small amount of water or mild soap and water if necessary.
INSTALLATION GUIDE
Step 1 : Loose the lock knob and remove it with the screw out of
the slot
②
①
Réf : KO049525
Step 2 : Press down on the clamp and adjust the sliding screw to fit the
size of handlebar you want to attach it to.
②
Sliding screw
Lock knob
①
Press
Step 3 : Install the clamp on the handlebar.
Step 5 : Tight the screw on the handlebar.
Step 7 : Press the button on the back to open both side arms at the
same time.
Step 9 : You can further secure your phone with the extendable bands
of the holder.
Guarantee
The products are guaranteed against any failure resulting from a manufacturing defect. This warranty does not cover defects resulting
from misuse or normal wear and tear, carefully keep your invoice stapled to this guide.
2023/04V01/MKG
Step 4 : Replace the locking knob with the screw in the slot, then
tighten the knob.
Step 6 : Push the ball joint into the swivel joint and tighten the screw
to secure the bracket.
Step 8 : Slide your phone into the holder and adjust the size by
squeezing the side arms.
SRDi - 85430 La Boissière des Landes - France
Publicité
