Comments To The 3-Way Solar Ball Valve - Praher Plastics EO510-IND Mode D'emploi

DN
d
G 1
TSO
A
C
D
t 2
SSO
Y 1 / 2
TSO SSO
Z 1 / 2
TSO SSO
bar
E
H
L
1 TSO = threaded socket
2 SSO = solvent socket
12.1.

Comments to the 3-way Solar ball valve:

The ball seating joint with the pressure compensation system must always be installed
on the side with the higher pressure (pump side) because it is otherwise non-
functional and the ball valve may be destroyed. The ball seating joint with the pressure
compensation board can be converted using the spanner provided. In as-delivered
IMPORTANT: The solar ball valve has got a pressure-compensation-system, to avoid a rise in
pressure change-over. If a change over process is
supply), a position can be reset manually (manual override).
10
32 40
40 50
1 1/4" 1 1/2"
162 162
81 81
101 101
27,5 31,5
85 85
170 171
3 3
205 205
225 225
56 56
dimensions in mm
condition, it is in the middle position.
50
63
2"
181
90,5
124,5
38,5
96
192
3
221
241
65
interrupted (e.g. failure of the current
www.praher-plastics.com
Pressure connection