Télécharger
Partager
Imprimer la page
Jumper JPD-FR300 Manuel D'instructions
  1. Manuels
  2. Marques
  3. Jumper Manuels
  4. Thermomètres
  5. JPD-FR300
  6. Manuel d'instructions
Jumper JPD-FR300 Manuel D'instructions

Jumper JPD-FR300 Manuel D'instructions

Masquer les pouces

Publicité

Liens rapides

Télécharger ce manuel
All manuals and user guides at all-guides.com
0482
Model: JPD-FR300
Infrared Thermometer
Instruction Manual
Shenzhen Jumper Medical Equipment Co., Ltd.
Manual Version: 1.0
Date of Issue: 2020/04

Publicité

loading

Manuels Connexes pour Jumper JPD-FR300

Sommaire des Matières pour Jumper JPD-FR300

  • Page 1 All manuals and user guides at all-guides.com 0482 Model: JPD-FR300 Infrared Thermometer Instruction Manual Shenzhen Jumper Medical Equipment Co., Ltd. Manual Version: 1.0 Date of Issue: 2020/04...
  • Page 2 All manuals and user guides at all-guides.com...
  • Page 3 All manuals and user guides at all-guides.com Content EN..............1 DE..............34 FR..............50 IT..............65 ES..............81...
  • Page 4 No part of this document may be changed, excerpted, copied, reproduced, or imitated in any form or by any means without the prior consent of Shenzhen Jumper Medical Equipment Co., Ltd.
  • Page 5 In case of any damage or operation problem, please contact the dealer or contact Jumper directly. You will need the following information when making your claim: device model, serial number, purchase date, and your contact information and address.
  • Page 6 All manuals and user guides at all-guides.com Do not subject the thermometer to vibration or impact.  The normal body temperature varies from person to person.  Tracking a person's body temperature will help determine whether they have fever. Do not take body temperature readings within 20 minutes after ...
  • Page 7 All manuals and user guides at all-guides.com Warning Warning  Do not force the temperature probe of the thermometer into an ear canal. Otherwise, the ear canal may get injured.  Keep the thermometer out of the reach of children. ...
  • Page 8 All manuals and user guides at all-guides.com Symbols Symbol Description Type BF applied part. Attention must be paid. The action is prohibited. Information about the manufacturer. Date of manufacture. Consult the instructions for use. This product complies with the MDD93/42/EEC requirements.
  • Page 9 All manuals and user guides at all-guides.com from different sites should not be compared directly. To determine if an individual is experiencing an elevated body temperature and/or having a fever, it is critical to know the individual’s normal body temperature when he/she is well. Take multiple readings to obtain the normal body temperature range and note the specific body site measured, for example: forehead or eardrum temperature.
  • Page 10 Intended use The JPD-FR300 Dual Mode Digital Infrared Thermometer is intended for the measurement of human body temperatures. The forehead mode is indicated for use by people of all ages and the eardrum mode is indicated for use by people above three months old.
  • Page 11 All manuals and user guides at all-guides.com Features Good safety ● Passive infrared receiving technology. Easy operation ● Ergonomic design ● One button measurement Quick measurement ● 1-second measurement High accuracy ● Advanced infrared temperature sensor, with high sensitivity ● High accuracy with automatic temperature calibration Diverse functions ●20 readings recall ●...
  • Page 12 All manuals and user guides at all-guides.com Product structure (1) LCD display screen (2) Power button / Measure button (3) Unit switch button (˚C / ˚F) (4) Mode button (Adult mode / Child mode/ Object) (5) Probe (take off the cover when measuring the ear temperature) (6) Probe cover (Automatic switch among object, forehead and ear modes, by removing the probe cover to measure ear temperature and placing back the probe cover for object and forehead temperature measurement.)
  • Page 13 All manuals and user guides at all-guides.com 7. Low battery 8. Memory recall 9.Temperature value Sounds and backlight color instructions Range Sounds Backlight Forehead temperature (Adult / Child) A long beep green 35.0℃-37.5℃/95.0℉-99.5℉ 3 short double beeps 37.6℃-42.2℃/99.6℉-108.0℉ Ear temperature (Adult / Child) A long beep green 35.0℃-37.5℃/95.0℉-99.5℉...
  • Page 14 All manuals and user guides at all-guides.com Display and Operating Instructions Operating Instructions Sound and Screen Display Backlight Color Displayed State Measuring Ear temperature (Adult / Child) Take off the probe cover, press and release the Power button for 1 second to power on the thermometer.
  • Page 15 All manuals and user guides at all-guides.com Operating Instructions Sound and Screen Display Backlight Color Displayed State Put the cover on the probe, press and release the Power button for 1 second to power on the thermometer The “Head” symbol is displayed on the screen.
  • Page 16 All manuals and user guides at all-guides.com Operating Instructions Sound and Screen Display Backlight Color Displayed State Put the cover on the probe, switch to the object measurement mode by pressing the Mode button.The See the table in the thermometer enters the Object “Sounds and mode.
  • Page 17 All manuals and user guides at all-guides.com Operating Instructions Sound and Screen Display Backlight Color Displayed State In a power-on state, press the Memory button enter the memory mode. When the Memory button is released, 01 will be shown, followed by the recorded reading. Press the Memory button again for the next recorded data.
  • Page 18 All manuals and user guides at all-guides.com Operating Instructions Sound and Screen Display Backlight Color Displayed State The display is as shown , when When the power is there is no more data checked while turned back on, recalling memories. Remove 2 dry there are a long batteries and after 10 seconds beep and a green...
  • Page 19 All manuals and user guides at all-guides.com Operating Instructions Sound and Screen Display Backlight Color Displayed State When putting on the probe cover, press the Mode button to switch between object and forehead Silent, the modes. Ear mode (adult/child) will backlight is green.
  • Page 20 All manuals and user guides at all-guides.com Operating Instructions Sound and Screen Display Backlight Color Displayed State Error information & low battery The ambient temperature is higher A long beeps,the than 40.0ºC (104.0ºF) or lower than backlight is red. 10.0ºC (50.0ºF). An error occurs when data is being read from or written to the memory, A long beeps,the...
  • Page 21 All manuals and user guides at all-guides.com ear temperature. 3. Press the Power button to power on the thermometer. The “Ear” symbol is displayed on the screen. 4. Switch between “adult” and “child” modes by pressing Mode button. symbol shows up in “child” mode. 5.
  • Page 22 All manuals and user guides at all-guides.com Be careful when taking temperature on a child, whose ear canal is small. Measuring Forehead Temperature Put the cover on the probe of thermometer. Press the Power button to power on the thermometer. the “ ” symbol is displayed on the screen.
  • Page 23 All manuals and user guides at all-guides.com After a measurement (1) After each measurement, you can enter the recall mode and query earlier temperature readings. For more details, see "Recall 20 memories" in the preceding table. (2) After each measurement, clean the temperature probe with a soft cloth, and put the thermometer in a dry and well-ventilated place.
  • Page 24 All manuals and user guides at all-guides.com (6) No intense emotion or strenuous exercises before measuring; (7) After measuring the data once, you should wait for the backlight to turn off and measure the next data. Replacing Batteries 1、Slide the battery cover off along the marked direction and take it off. 2、Insert the two AAA batteries into the compartment according to the stated polarities.
  • Page 25 All manuals and user guides at all-guides.com Cleaning and Disinfection Cleaning Recommended detergents: ＊ Medical detergents; ＊ Home use mild detergents; Cleaning steps: (1) Take the batteries out before cleaning. (2) Clean the temperature probe with a soft cloth. Clean the lens of the temperature probe with a cotton swab. (3) Wipe the thermometer body with a slightly damp soft cloth.
  • Page 26 All manuals and user guides at all-guides.com Wet the clean soft cloth with a small quantity of disinfectant, wipe the thermometer and quickly dry it. Disinfect the thermometer body and the area around the temperature probe with a cloth slightly moistened with 75% medical alcohol. Do not use hot steam or ultraviolet radiation for disinfection.
  • Page 27 All manuals and user guides at all-guides.com requirements. Check regularly whether safety risks exist. Remove the batteries if the thermometer will not be used for more than two months. Troubleshooting Problem Possible Cause Solution Low battery Change the batteries. Polarities of the Make sure that the The thermometer batteries are reversed.
  • Page 28 Specifications Product Name Infrared Thermometer Product Model JPD-FR300 Power Supply Internal power supply Mode Operating Voltage DC 3V Battery Model AAA x 2 Operating Mode Continuous operating Display...
  • Page 29 All manuals and user guides at all-guides.com Outer dimensions 155.9*40.2*49.2mm (mm) Weight (g) Thermometer (with batteries): 90g Manufacturing see the label date Temperature: 10°C~ 40°C (50°F–104°F) Operating Humidity: 15%–95% RH, non-condensing Environment Atmospheric pressure: 86–106 kPa The infrared thermometer has been tested and conforms to the standard ASTM E1965-98.
  • Page 30 ● Portable and mobile RF communications equipment can affect Infrared Thermometer JPD-FR300. ● The Infrared Thermometer JPD-FR300 should not be used adjacent to or stacked with other equipment. Guidance and manufacturer´s declaration – Electromagnetic emission –for all equipment and systems Guidance and manufacturer´s declaration –...
  • Page 31 Guidance and manufacturer´s declaration – Electromagnetic immunity The Infrared Thermometer JPD-FR300 is intended for use in the electromagnetic environment specified below. The customer or the user of the Infrared Thermometer JPD-FR300 should assure that it is used in such an environment. Immunity...
  • Page 32 Guidance and manufacturer´s declaration – Electromagnetic immunity The Infrared Thermometer JPD-FR300 is intended for use in the electromagnetic environment specified below. The customer or the user of the Infrared Thermometer JPD-FR300 should assure that it is used in such an environment. Immunity...
  • Page 33 All manuals and user guides at all-guides.com transmitter. Recommended separation distance where p is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m). Field strengths from fixed transmitters, determined by an...
  • Page 34 RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the JPD-FR300 is used exceeds the applicable RF compliance level above, the JPD-FR300 should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the JPD-FR300.
  • Page 35 All manuals and user guides at all-guides.com communications equipment (transmitters) Infrared Thermometer JPD-FR300 as recommended below, according to the maximum output power of the communications equipment. Rated Separation distance according to frequency of maximum transmitter output power 80 MHz to 800 MHz 800 MHz to 2.5 GHz...
  • Page 36 2.Failure resulting from an unexpected dropping during application or transportation. 3.Failure resulting from not following the instructions in the user’s manual. After-sale service unit: Shenzhen Jumper Medical Equipment Co., Ltd. Address: D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen,Guangdong,China Tel: +86-755-26696279 Fax: +86-755-26852025 E-mail：info@jumper-medical.com...
  • Page 37 All manuals and user guides at all-guides.com Packungsinhalt Name Menge Infrarot Thermometer Beutel Batterie (AAA) Bedienungsanleitung Körpertemperatur-Grundlagen Körperteil Normaler Temperaturbereich Stirn 34.7°C-37.3°C /(94.5°F- 99.1°F) Gehörgang 35.8°C–38.0°C / 96.4°F–100.4°F Mund 35.5°C–37.5°C / 95.9°F–99.5°F Achsel 34.7°C–37.3°C / 94.5°F–99.1°F Anus 36.6°C–38.0°C / 97.9°F–100.4°F...
  • Page 38 All manuals and user guides at all-guides.com Produktstruktur (1）LCD-Bildschirm (2) Ein- / Ausschalter / Messtaster (3) Geräteschaltknopf (˚C / ˚F) (4) Modustaste (Erwachsenenmodus / Kindermodus / Objekt) (5) Sonde (Abdeckung abnehmen, wenn die Ohrtemperatur gemessen wird) (6) Sondenabdeckung (Automatischer Wechsel zwischen Objekt-, Stirn- und Ohrmodus durch Entfernen der Sondenabdeckung zur Messung der Ohrtemperatur und Zurücksetzen der Sondenabdeckung zur Messung der Objekt- und Stirntemperatur.)
  • Page 39 All manuals and user guides at all-guides.com 5. Stummschalten / Stummschalten aufheben 6. Temperatureinheit (˚C /˚F) 7. Batterie schwach 8. Speicherabruf 9.Temperaturwert Anweisungen für Töne und Hintergrundbeleuchtung Hintergrund Angebot Geräusche -beleuchtung Stirntemperatur (Erwachsener / Kind) Ein langer Piepton grün 35.0℃-37.5℃/95.0℉-99.5℉ 3 kurze doppelte 37.6℃-42.2℃/99.6℉-108.0℉...
  • Page 40 All manuals and user guides at all-guides.com Anzeige- und Bedienungsanleitung Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Messung der Ohrtemperatur (Erwachsener / Kind) Nehmen Sie die Sondenabdeckung ab, halten Sie den Netzschalter 1 Sekunde lang gedrückt, um das Thermometer einzuschalten. Das Symbol "...
  • Page 41 All manuals and user guides at all-guides.com Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Setzen Sie die Abdeckung auf die Sonde, drücken Sie die Ein- / Aus-Taste 1 Sekunde lang, um das Thermometer einzuschalten. Das Symbol “Kopf” wird auf dem Bildschirm angezeigt.
  • Page 42 All manuals and user guides at all-guides.com Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Setzen Sie die Abdeckung auf die Sonde und wechseln Sie durch Drücken der Modustaste in den Objektmessmodus. Das Siehe die Tabelle Thermometer wechselt in den im Abschnitt „...
  • Page 43 All manuals and user guides at all-guides.com Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Im Ohrmodus wird eine Temperatur von weniger als 35.0˚C (95.0˚F) angezeigt. langer Im Stirnmodus wird eine Piepton, Temperatur von weniger als 35.0˚C Hintergrundbeleuc (95.0˚F) angezeigt. htung ist rot.
  • Page 44 All manuals and user guides at all-guides.com Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Drücken Sie im eingeschalteten Zustand die Speichertaste, um den Speichermodus aufzurufen. Wenn die Speichertaste losgelassen wird, wird 01 angezeigt, gefolgt von der aufgezeichneten Messung. Drücken Sie die Speichertaste erneut, um die nächsten aufgezeichneten Daten abzurufen.
  • Page 45 All manuals and user guides at all-guides.com Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Wenn die Die Anzeige ist wie gezeigt, wenn Stromversorgung beim Abrufen von Speichern keine wieder Daten mehr überprüft werden. eingeschaltet wird, Entfernen Sie 2 Trockenbatterien ertönt ein langer und installieren Sie die Piepton und eine...
  • Page 46 All manuals and user guides at all-guides.com Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Drücken Sie beim Aufsetzen der Sondenabdeckung die Modustaste, um zwischen Objekt- und Lautlos ist die Stirnmodus zu wechseln. Der Hintergrundbeleuc Ohrmodus (Erwachsener / Kind) htung grün. wird durch Entfernen der Sondenabdeckung aktiviert.
  • Page 47 All manuals and user guides at all-guides.com Ton und Bedienungsanleitung Bildschirmanze Hintergrundbele Angezeigter Status uchtung Fehlerinformation & Batterie schwach Ein langer Die Umgebungstemperatur ist Piepton, die höher als 40.0˚C (104.0˚F) oder Hintergrundbeleuc niedriger als 10.0˚C (50.0˚F). htung ist rot. Ein Fehler tritt auf, wenn Daten aus Ein langer dem Speicher gelesen oder in Piepton, die...
  • Page 48 All manuals and user guides at all-guides.com 2. Nehmen Sie die Sondenabdeckung vom Thermometer ab, bevor Sie die Ohrtemperatur messen. 3. Drücken Sie die Ein- / Aus-Taste, um das Thermometer einzuschalten. Das Symbol “Ohr” wird auf dem Bildschirm angezeigt. 4. Wechseln Sie durch Drücken der Modustaste zwischen den Modi “Erwachsener”...
  • Page 49 All manuals and user guides at all-guides.com Wenn Sie die Temperatur bei einem Erwachsenen messen, ziehen Sie das Ohr vorsichtig nach oben und hinten, um sicherzustellen, dass der Gehörgang gerade ist, damit der Temperaturfühler einen Infrarotstrahl vom Trommelfell empfangen kann. Seien Sie vorsichtig, wenn Sie die Temperatur eines Kindes messen, dessen Gehörgang klein ist.
  • Page 50 All manuals and user guides at all-guides.com 3. Drücken Sie die Modustaste. Das Thermometer wechselt in den Objektmodus. Das Symbol “ ” wird auf dem Bildschirm angezeigt. 4. Richten Sie die Thermometer-Sonde auf die Mitte des Objekts, etwa 1 bis 3 cm von der Objektoberfläche entfernt. 5.
  • Page 51 All manuals and user guides at all-guides.com Niedriger Wechseln Sie die Batteriestatus Batterien. Das Thermometer lässt sich nicht Die Polaritäten der Stellen Sie sicher, einschalten. Batterien sind dass die Batterien vertauscht. richtig eingelegt sind. Das Thermometer ist Kontaktieren Sie den beschädigt.
  • Page 52 All manuals and user guides at all-guides.com Spezifikationen Produktname Infrarot Thermometer Produktmodell JPD-FR300 Netzteilmodus Interne Stromversorgung Betriebsspannung DC 3V Batteriemodell AAA x 2 Betriebsart Dauerbetrieb Anzeige Segment LCD Messzeit Ungefähr 1 Sekunde Latenz zeit Ungefähr 3 Sekunden Stirnmodus:35.0°C–42.2°C (95.0°F–108.0°F) Messbereich Ohrmodus:35.0°C–42.0°C (95.0°F–107.6°F)
  • Page 53 All manuals and user guides at all-guides.com Contenu du colis Quantité Thermomètre infrarouge Poche Batterie (AAA) Manuel d'instructions Bases de la température corporelle Partie du corps Plage de température normale Front 34.7°C-37.3°C / 94.5°F- 99.1°F Le conduit auditif 35.8°C–38.0°C / 96.4°F–100.4°F Bouche 35.5°C–37.5°C / 95.9°F–99.5°F Aisselle...
  • Page 54 All manuals and user guides at all-guides.com La structure du produit (1) Écran d'affichage LCD (2) Bouton d'alimentation / bouton de mesure (3) Bouton de commutation de l'unité (˚C / ˚F) (4) Bouton Mode (mode adulte / mode enfant / objet) (5) Sonde (enlever le couvercle lors de la mesure de la température de l'oreille) (6) Couvercle de sonde (Basculement automatique entre les modes objet,...
  • Page 55 All manuals and user guides at all-guides.com 6. Unité de température (˚C / ℉) 7. Batterie faible 8. Rappel de mémoire 9. valeur de température Instructions de couleur des sons et du rétroéclairage Gamme Des sons Rétro-éclairage Température frontale (adulte / enfant) Un long bip vert 35.0℃-37.5℃/95.0℉-99.5℉...
  • Page 56 All manuals and user guides at all-guides.com Affichage et mode d'emploi Mode d'emploi Écran Couleur son et d'affichage rétroéclairage Etat affiché Mesurer la température de l'oreille (adulte / enfant) Retirez le couvercle de la sonde, appuyez et relâchez le bouton d'alimentation pendant 1 seconde pour allumer le thermomètre.
  • Page 57 All manuals and user guides at all-guides.com Mode d'emploi Écran Couleur son et d'affichage rétroéclairage Etat affiché Placez le couvercle sur la sonde, appuyez et relâchez le bouton d'alimentation pendant 1 seconde pour allumer le thermomètre. Le symbole “Tête” s'affiche à l'écran.
  • Page 58 All manuals and user guides at all-guides.com Mode d'emploi Écran Couleur son et d'affichage rétroéclairage Etat affiché Placez le couvercle sur la sonde, passez en mode de mesure d'objet Reportez-vous au en appuyant sur le bouton Mode. Le tableau de la thermomètre passe en mode objet.
  • Page 59 All manuals and user guides at all-guides.com Mode d'emploi Écran Couleur son et d'affichage rétroéclairage Etat affiché À l'état allumé, appuyez sur le bouton Memory pour entrer en mode mémoire. Lorsque le bouton Memory est relâché, 01 s’affiche, suivi de la lecture enregistrée.
  • Page 60 All manuals and user guides at all-guides.com Mode d'emploi Écran Couleur son et d'affichage rétroéclairage Etat affiché L'affichage est comme indiqué, Lorsque lorsqu'il n'y a plus de données l'alimentation est vérifiées lors du rappel des rétablie, il y a un mémoires.
  • Page 61 All manuals and user guides at all-guides.com Mode d'emploi Écran Couleur son et d'affichage rétroéclairage Etat affiché Lors de la mise en place du couvre-sonde, appuyez sur le Silencieux, le bouton Mode pour basculer entre rétroéclairage est les modes objet et front. Le mode vert.
  • Page 62 All manuals and user guides at all-guides.com Mode d'emploi Écran Couleur son et d'affichage rétroéclairage Etat affiché Informations d'erreur et batterie faible La température ambiante est Un long bip, le supérieure à 40.0˚C (104.0℉) ou rétro-éclairage est rouge. inférieure à 10.0˚C (50.0℉). Une erreur se produit lorsque des données sont en cours de lecture ou Un long bip, le...
  • Page 63 All manuals and user guides at all-guides.com température de l’oreille. 3. Appuyez sur le bouton Marche / Arrêt pour allumer le thermomètre. Le symbole “Oreille” s'affiche à l'écran. 4. Basculez entre les modes “adulte” et “enfant” en appuyant sur le bouton Mode.
  • Page 64 All manuals and user guides at all-guides.com auditif est droit, afin que la sonde de température puisse recevoir un rayon infrarouge du tympan. Faites attention lorsque vous prenez la température chez un enfant dont le conduit auditif est petit.. Mesurer la température frontale 1.
  • Page 65 All manuals and user guides at all-guides.com de la température sera affichée à l'écran instantanément. 6. Si aucune activité n'est détectée, le thermomètre s'éteindra automatiquement au bout de 10 secondes. Après une mesure (1) Après chaque mesure, vous pouvez passer en mode de rappel et interroger les relevés de température antérieurs.
  • Page 66 All manuals and user guides at all-guides.com sont inversées. correctement installées. Le thermomètre est Contactez le endommagé. fabricant. La température Prenez une mesure à ambiante est inférieure une température ambiante comprise à 10 ˚C (50.0 ℉) ou "Er1" est affiché. entre 10 ˚C (40 ˚C) supérieure à...
  • Page 67 All manuals and user guides at all-guides.com modèle du produit JPD-FR300 Mode Alimentation interne d'alimentation Tension de DC 3V fonctionnement Modèle de batterie AAA x 2 Mode de Fonctionnement continu fonctionnement Afficher Segment LCD Mesurer le temps Environ 1 seconde...
  • Page 68 All manuals and user guides at all-guides.com Contenuto della confezione Nome Quantità Termometro a infrarossi Marsupio Batteria (AAA) Manuale di istruzioni Nozioni di base sulla temperatura corporea Parte del corpo Intervallo di temperatura normale Fronte 34.7°C–37.3°C / 94.5°F–99.1°F Canale uditivo 35.8°C–38.0°C / 96.4°F–100.4°F Bocca 35.5°C–37.5°C / 95.9°F–99.5°F...
  • Page 69 All manuals and user guides at all-guides.com Struttura del prodotto (1) Schermo LCD (2) Pulsante di accensione / pulsante Misura (3) Pulsante di commutazione unità (˚C / ˚F) (4) Pulsante modalità (Modalità adulto / Modalità bambino / Oggetto) (5) Sonda (togliere il coperchio quando si misura la temperatura dell'orecchio) (6) Coperchio della sonda (Commutazione automatica tra le modalità...
  • Page 70 All manuals and user guides at all-guides.com 6. Unità di temperatura (˚C /˚F) 7. Batteria scarica 8. Richiamo della memoria 9.Temperatura Suoni e istruzioni sul colore della retroilluminazione Gamma Suoni Controluce Temperatura frontale (adulto / bambino) Un lungo segnale verde 35.0℃-37.5℃/95.0℉-99.5℉...
  • Page 71 All manuals and user guides at all-guides.com Display e istruzioni per l'uso Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato Misurazione della temperatura dell'orecchio (adulto / bambino) Rimuovere il coperchio della sonda, premere e rilasciare il pulsante di accensione per 1 secondo per accendere il termometro.
  • Page 72 All manuals and user guides at all-guides.com Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato Posizionare il coperchio sulla sonda, premere e rilasciare il pulsante di accensione per 1 secondo per accendere il termometro Il simbolo "Testa" viene visualizzato sullo schermo. Vedere la tabella Passa alla modalità...
  • Page 73 All manuals and user guides at all-guides.com Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato Posizionare il coperchio sulla sonda, passare alla modalità di misurazione oggetto premendo il Vedere la tabella pulsante Modalità. Il termometro nella sezione passa alla modalità Oggetto. Il "Istruzioni sul simbolo “Casa”...
  • Page 74 All manuals and user guides at all-guides.com Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato In modalità Orecchio, una lettura della temperatura inferiore a 35.0˚C (95.0℉) Un lungo segnale In modalità Fronte, una lettura della acustico, la temperatura inferiore a 35.0˚C (95.0 retroilluminazione ℉) è...
  • Page 75 All manuals and user guides at all-guides.com Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato In uno stato di accensione, premere il pulsante Memoria per accedere alla modalità memoria. Quando il pulsante Memory viene rilasciato, verrà visualizzato 01, seguito dalla lettura registrata.
  • Page 76 All manuals and user guides at all-guides.com Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato Il display è come mostrato, quando Quando si non sono presenti più rilevazioni riaccende, viene durante il richiamo delle memorie. emesso un Rimuovere le batterie , attendere 10 segnale acustico secondi e inserirle nuovamente lungo con...
  • Page 77 All manuals and user guides at all-guides.com Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato Dopo aver posizionato il coprisonda premere il pulsante Modalità per cambaire la modalità oggetto e Silenzioso, la fronte. La modalità orecchio (adulto retroilluminazione / bambino) verrà...
  • Page 78 All manuals and user guides at all-guides.com Colore audio e Istruzioni per l'uso Schermo retroilluminazion Stato visualizzato Informazioni sull'errore e batteria scarica Un lungo segnale La temperatura ambiente è acustico, la superiore a 40.0˚C (104.0℉) o retroilluminazione inferiore a 10.0˚C (50.0℉). è...
  • Page 79 All manuals and user guides at all-guides.com 2. Rimuovere il coperchio della sonda dal termometro prima di misurare la temperatura dell'orecchio. 3. Premere il pulsante di accensione per accendere il termometro. Il simbolo “Orecchio” viene visualizzato sullo schermo. 4. Per passare dalla modalita “adulto” a "bambino" premere il pulsante Modalità.
  • Page 80 All manuals and user guides at all-guides.com dritto, in modo che la sonda di temperatura possa ricevere un raggio infrarosso dal timpano. Fare attenzione quando si prende la temperatura su un bambino, il cui condotto uditivo è piccolo.. Misurazione della temperatura frontale 1.
  • Page 81 All manuals and user guides at all-guides.com temperatura verrà immediatamente visualizzata sullo schermo. 6. Se non viene rilevata alcuna attività, il termometro si spegnerà automaticamente entro 10 secondi. Dopo una misurazione (1) Dopo ogni misurazione, è possibile accedere alla modalità di richiamo e interrogare letture di temperatura precedenti.
  • Page 82 All manuals and user guides at all-guides.com correttamente. Il termometro è Contattare il danneggiato. produttore La temperatura Effettuare una ambiente è inferiore a misurazione a una temperatura ambiente 10 ˚C (50,0 ° F) o Viene visualizzato compresa tra 10 ˚C "Er1".
  • Page 83 All manuals and user guides at all-guides.com Modello di JPD-FR300 prodotto Modalità di Alimentatore interno alimentazione Tensione operativa DC 3V Modello di batteria AAA x 2 Modalità operativa Funzionamento continuo Display LCD a segmenti Misura il tempo 1 secondo circa...
  • Page 84 All manuals and user guides at all-guides.com Contenidos del paquete Nombre Cantidad Termómetro infrarojo Bolsa Batería (AAA) Manual de instrucciones Conceptos básicos de temperatura corporal Parte del cuerpo Rango de temperatura normal Frente 34.7°C-37.3°C / 94.5°F- 99.1°F Canal auditivo 35.8°C–38.0°C / 96.4°F–100.4°F Boca 35.5°C–37.5°C / 95.9°F–99.5°F Axila...
  • Page 85 All manuals and user guides at all-guides.com Estructura del producto (1) Pantalla LCD (2) Botón de encendido / botón de medición (3) Botón de selección (˚C / ˚F) (4) Botón de modo (modo adulto / modo niño / objeto) (5) Sonda (retire la cubierta cuando mida la temperatura del oído) (6) Tapa de la sonda (Cambio automático entre los modos de objeto, frente y oído, quitando la cubierta de la sonda para medir la temperatura del oído y colocando nuevamente la cubierta de la sonda para medir la...
  • Page 86 All manuals and user guides at all-guides.com 7. Batería baja 8. Recuperación de memoria 9.valor de temperatura Instrucciones de sonido y color de la luz Rango Sonido Color de la Luz Temperatura de la frente (adulto / niño) Un pitido largo verde 35.0℃-37.5℃/95.0℉-99.5℉...
  • Page 87 All manuals and user guides at all-guides.com Pantalla e Instrucciones de Funcionamiento Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado Medición de la temperatura del oído (adulto / niño) Retire la cubierta de la sonda, presione y suelte el botón de encendido durante 1 segundo para encender el termómetro.
  • Page 88 All manuals and user guides at all-guides.com Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado Coloque la tapa de la sonda, presione y suelte el botón de encendido durante 1 segundo para encender el termómetro. El símbolo "Cabeza"...
  • Page 89 All manuals and user guides at all-guides.com Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado Coloque la tapa de la sonda, cambie al modo de medición de objetos presionando el botón Modo. El Consulte la tabla termómetro ingresa al modo Objeto.
  • Page 90 All manuals and user guides at all-guides.com Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado En el modo Oído, una lectura de temperatura de menos de 35.0˚C (95.0˚F) En modo Frente, una lectura de Un pitido largo, la temperatura de menos de 35.0˚C luz de fondo es...
  • Page 91 All manuals and user guides at all-guides.com Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado En un estado de encendido, presione el botón Memoria para ingresar al modo de memoria. Cuando se suelta el botón Memoria, se mostrará...
  • Page 92 All manuals and user guides at all-guides.com Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado La pantalla es como se muestra, Cuando se vuelve cuando no hay más datos a encender, hay un verificados al recuperar memorias.
  • Page 93 All manuals and user guides at all-guides.com Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado Al colocar la cubierta de la sonda, presione el botón Modo para cambiar entre los modos de objeto y Silencio, el color frente.
  • Page 94 All manuals and user guides at all-guides.com Instrucciones de uso Visualización Sonido y Color de la pantalla de la Luz Estado visualizado Información de error y batería baja La temperatura ambiente es Un pitido largo, el superior a 40.0˚C (104.0˚F) o color de la luz es roja.
  • Page 95 All manuals and user guides at all-guides.com temperatura del oído. 3. Presione el botón de Encendido para encender el termómetro. El símbolo "Oído" se muestra en la pantalla. 4. Cambie entre los modos "adulto" y "niño" presionando el botón Modo. el símbolo aparece en modo "niño".
  • Page 96 All manuals and user guides at all-guides.com Tenga cuidado al tomar temperatura en un niño, cuyo canal auditivo es pequeño. Medición de la temperatura de la frente 1. Coloque la tapa en la sonda del termómetro. 2. Presione el botón de Encendido para encender el termómetro. el símbolo "...
  • Page 97 All manuals and user guides at all-guides.com Después de una medición (1) Después de cada medición, puede ingresar al modo de recuperación y consultar lecturas de temperatura anteriores. Para obtener más detalles, consulte "Recuperación de lecturas realizadas" en la tabla anterior. (2) Después de cada medición, limpie la sonda de temperatura con un paño suave y coloque el termómetro en un lugar seco y bien ventilado.
  • Page 98 La lectura de La sonda de Póngase en contacto temperatura es temperatura está con el fabricante. más alta que el dañada. rango de temperatura corporal típico. Especificaciones Nombre del Termómetro infrarojo producto Modelo del JPD-FR300 Producto...
  • Page 99 All manuals and user guides at all-guides.com Modo de suministro de Fuente de alimentación interna energía Tensión de DC 3V funcionamiento Modelo de batería AAA x 2 Modo operativo Funcionamiento continuo Monitor Segmento LCD Medir el tiempo Alrededor de 1 segundo Tiempo de latencia Alrededor de 3 segundos Modo de frente:35.0°C–42.2°C (95.0°F–108.0°F) Rango de...
  • Page 100 All manuals and user guides at all-guides.com Shenzhen Jumper Medical Equipment Co., Ltd. Address: D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, China Tel:+86-755-26696279 Fax:+86-755-26852025 Website: http://www.jumper-medical.com...