Publicité
Portable Tabletop Fire Pit
F-FPR7027-BK1
LEAK TEST:
Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor
area. Connect the propane gas tank to the regulator and turn the valve on the unit to the "off"
position. Brush a soap and water mixture on all connections. Turn the gas supply on; if bubbles
occur on any connection there may be a leak. If you smell gas or a leak is discovered turn the gas
valve off, disconnect propane gas tank and do not use the appliance until the leak is repaired.
Do not use the heating unit without inspecting the gas hose. If there are signs of wear or abrasion
you must replace the hose (if applicable). Pumice stones/lava rocks/fire glass could pop up and
strike somebody's face during the process of lighting this unit; stand away from the unit for the
first 20 minutes after igniting. Flame height should be a yellow/blue color between 2 - 10 inches
in height.
LIGHTING INSTRUCTION:
1. Turn all the control knobs clockwise to the 'OFF' position, and then turn the liquid propane
cylinder valve ON by slowly turning counterclockwise.
2. Push in and slowly turn the control knob anticlockwise until you hear a click and the burner
ignites. If not, repeat this process.
3. If the burner has not lit after retrying, wait 5 minutes and repeat step 2.
4. To turn the barbecue 'OFF', turn the cylinder valve or regulator switch to the 'OFF' position and
then turn the control knob on the appliance clockwise to the 'OFF' position.
EXTINGUISH INSTRUCTION:
1. Push and turn the ignition control knob clockwise to the "OFF" position.
2. Turn the propane gas tank valve on the gas tank to close the gas supply and disconnect the
propane gas tank.
WARNING:
Fire pit and propane gas cylinder minimum distance must be over 60 inches (as the picture
shows).
12
Publicité
