Cleaning And Maintenance - Imetec SCALDALETTO N3920 Instructions D'utilisation

• When the Express pre-heat button (9) is released, the Express LED switches off and
the last temperature setting lights up (6) on the controller. At the first use, the controller
automatically switches on temperature level 5.
EN
• Press temperature button (10) to select your preferred all night temperature setting from 1
to 5. The higher the number, the higher the temperature. The temperature led will light up
(6) on the control unit.
• If the controller is in stand by mode, press the Express pre-heat button (9) to activate the
fast pre-heat function. Press the timer selector (8) to activate your preferred night-use
temperature.
MEMORY FUNCTION
After using your mattress cover for a few minutes, the control unit will remember your last
temperature setting.
AUTO-OFF FUNCTION
The underblanket has an automatic switch-off function which is activated after 1 hour or 9 hours.
When switched on, the control unit automatically sets itself to 1 hour on the auto-off timer and LED
1 lights up in green (7). To change the programming of the auto-off time, press the timer selector
button (8) and select the desired temperature. Each time the auto-off time is reset, the timer starts
from zero. When the time has elapsed, the underblanket switches off and the standby LED (11)
lights up in blue.
SWITCHING OFF
To disconnect your mattress cover from the mains, switch the control to OFF position 'O' (12).
The underblanket is washable. Check the washing symbols on the label to ensure it is
washed correctly.
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the underblanket
before cleaning or performing maintenance.
BEFORE WASHING
• Take the plug of the control unit cable out of the mains socket (3).
• Press the grip levers at the sides of the control unit connector (2) to remove the control
unit connector from the underblanket connector (1).
MACHINE WASHING
• The underblanket can be cleaned in the washing machine at 30°C, on a delicate cycle.
• Use only the delicate cycle for spinning. DO NOT make an additional spinning cycle.
17

CLEANING AND MAINTENANCE