Publicité
Attach the Steering Wheel
1
5
12
3
2
4
Turn the vehicle body upright.
1. Plug the sound unit connector on the
steering wheel into the connector on
the vehicle body.
2. Fit the steering wheel to the end of
the steering column.
3. Insert the #5 nut into the slot at right
side of the steering wheel.
4. Line up the holes on the steering
wheel with the holes on the steering
column, insert and tighten the M5x35
machine screw.
5. Insert the flag into the hole on the
vehicle body.
Attach the Seat
3
1
1. Plug the red power connector into the terminal on battery.
2. Fit the tabs on seat back to holes in the vehicle body.
3. Using a slotted screwdriver (not included) or coin to turn the both
seat locks to the lock position.
3
2
13
Publicité
