Technical specifications
Number of LEDs
LED type
LED power
Luminous intensity
Lighting distance
Lighting levels
Continuous lighting (battery
charged 100%)
Battery charging time
Protection degree
Power supply
Dimensions
Weight
Operating temperature
Instructions for use
•
Press the button to turn on the flashlight at 100% maximum lighting power
•
Press the button twice: lighting 50%
•
Press the button three times: lighting 30%
•
Press the button four times to turn off the flashlight.
•
When the flashlight is off, press twice the button on the flashlight to activate the strobe
mode. Briefly press the button to turn off the flashlight.
•
Long press the button to turn on the flashlight at 100% maximum lighting power. At the
second press, the flashlight will turn off, without going through the other lighting levels.
Safety warnings
•
This flashlight is not intended for use by children except under the strict supervision of
an adult
•
Do not aim the light directly into the eyes of a person or an animal
•
Do not use a battery other than the one indicated, as it could cause damage to the
motherboard
•
Remove the plastic protection from the battery before using the flashlight
•
If you do not use the flashlight for a long time, remove the batteries.
User manual
1
SST20
10W
max. 700 lm
up to 250 m
3 levels + strobe
up to 2 hours
up to 3.5 hours
IP44
2 x 18650 3.7V 1500 mAh batteries connected in
parallel
55 x 55 x 238 mm
290 gr (without batteries)
-26°C ~ +80°C
3
English