Publicité
English
6. While holding the counterweight steady without any rotation, rotate carefully
only the Downforce Scale Dial until the "0" on the scale lines up with the
centerline marked along the top of the tonearm.
7. Rotate the counterweight including the downforce scale dial counter-
clockwise (as seen from the front of the turntable) to adjust the pressure to
the stylus manufacturer recommendations.
Note: The recommended pressure for the factory-installed cartridge is 3.0 – 3.5g
Line Input/Output Connections
Line Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, connect the 3.5mm auxiliary cable (not included) between
your audio device, and the Line In Jack of this unit, press the Mode Button until
Line Mode is selected and start playing the music.
Note: The function indicator will be teal.
Line Out Connection
1. If needed, first insert one end of the 3.5mm auxiliary cable (not included) into
the Line Input jack on your powered speakers according to their user manual.
2. Insert the other end of the 3.5mm auxiliary cable into the Line Output jack on
the unit.
Turntable Operation
1. Long press the Power/ Volume/ Mode Knob to turn the unit on.
2. Press the Mode Button and select the Phono mode.
Note: The Function Indicator will be green.
3. Set the Speed Selector accordingly.
4. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
5. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
6. Release the Tonearm Clip.
Note: when the turntable is not in use, remember to lock the Tonearm clip.
7. Use the Cue Lever to lift the tonearm.
8. Gently move the tonearm over the record where play is desired to begin. Set
the Cue Lever back to the down position. The tonearm will descend slowly
onto the record and begin to playback.
9. When the record is finished playing, use the Cue Lever again to raise the
tonearm and then return it to the Tonearm Rest. Release the lever to let the
tonearm sit back at its rest. To suspend the playback, repeat the same steps.
10. Lock the Tonearm Clip to secure the tonearm.
6
Publicité
