Feiss Cotswold Lane Instructions D'installation

Installation Instructions for
Cotswold Lane Outdoor Flush mount
Outdoor
G ENERAL RODUCT NFORMATION P
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a
additional information.
1A
LAMP
Secure the mounting plate to the junction box.
1
Screw the shorter end of the threaded nipple to the mounting plate.
2
Secure the mounting plate to the junction box.
3
4 Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
5
Connect the black fixture wire to the hot power line wire with a wire nut.
6
Place the fixture and lock washer onto the threaded nipple, then secure them in place by screwing the couple onto the
7
nipple.
Screw the threaded pipe to the bottom of the coupler.
8
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
9
Place the diffuser and washer onto the threaded pipe, then secure them in place by screwing the finial onto the pipe.
10
I :
LED dimmer. Consult lamp manufacturer for
MOUNTING PLATE
THREADED NIPPLE
9
THREADED PIPE
FINIAL
CAUTION RISK OF FIRE
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
JUNCTION BOX
2
LOCK WASHER
7
COUPLER
8
WASHER
10
1
OL5433
-
FIXTURE
DIFFUSER
OL5433
1.0