Publicité
REMOTE CONTROL DIAGRAM
Remote control first. When the remote control is on, foot pedal is
not workable
Operation Manual：
Take out the remote control, Open the battery compartment on the
back of the remote control and add two AAA LRO3 alkaline batteries.
Pay attention to the polarity of the batteries. When the alignment light
and speed indicator light up, it indicates that the battery installed is
correct. This product does not provide dry batteries.
<Button Description >
(1） Long press on the frequency key(M) 2-4 seconds, Low speed
LED light flashing. Turn on the power of the car, Low speed LED
light keep flashing to long lighting, then frequency bind succeed. If
the frequency bind failed (Low speed LED light flashing) , remove the
battery and repeat steps
P: Press to brake。
S: Speed：press to change speed(low,middle and high speed).
△Forward ▽backward。
◁ Turn left ▷ turn right
Warning
Only used by adults
Publicité
