Publicité
MATERIAL: TEKORSTONE
Tekorstone® is a composite material produced in Italy. Its internal mass consists of the combination of
a natural material and a polyester resin while the surface is coated with a stone effect technical polish.
Tekorstone® is hygienic and easy to clean, its surface can be cleaned with a soft cloth and water. If the
installation requires special cuts, due to dodges, pillars and projections, being a material easily wor-
kable, it can be cut with normal diamond tools.
USE AND MAINTENANCE
To remove most of the stains, limescale and dirt that normally deposit on the surface, clean with soapy
water or common detergents and a soft cloth. Rinse the surface well, then dry with a soft cloth.
The Synthesis shower tray is lasting, but it can be damaged if used improperly: in this case a reset is
possible using the proper kit.
Attention! Avoid extended contact with strong chemicals (perfume, iodine tincture, acetone, etc.).
Avoid using abrasive sponges and detergents.
GENERAL MAINTENANCE
Clean the surface using warm water and a mild detergent on a soft damp, non-abrasive, cloth or spon-
ge. Rinse with warm water on a soft cloth and dry using a soft cloth.
STAINS OF HARD WATER, SOAP OR MINERAL PRODUCTS
Clean using a descaling detergent (e.g. vinegar, VIAKAL®, CIF®,descaler). Rinse with warm water on a
soft, non-abrasive cloth and dry using a soft cloth.
DRAIN CLEANING
WHAT YOU
NEED?
Bicarbonate
STEP 1
HOW TO
Pour 60 g of baking soda and
CLEAN?
150 ml of vinegar down the drain
STEP 2
Cover with the wet cloth for 5
min and then rinse
ARYA
Cloth
Vinegar
+
5 min
+
Publicité
